Skip to main content

Cost Guide · Updated November 2026

How Much Does It Cost to Build a Pool in Sacramento?

Most published prices for a custom inground pool in the Sacramento area fall between about $45,000 and $100,000. One Sacramento and Roseville builder starts at $61,995 for a pool with an 80-foot perimeter and 500 square feet of concrete deck. Expansive clay and hardpan soil are the local factors that move a quote.

By Hannah Kessler, Pools & Outdoor Living Editor

$45K–$100K+

Custom pool, local builder range

$61,995

Starting price with 500 sq ft deck

~$1,400–$1,700

City permit fees on a $60K–$80K job

92.6°F

Average July high (NOAA)

What Pools Cost in Sacramento: Published Prices

National cost guides have no Sacramento-specific pool figures, so the best local numbers come from builders who publish prices. Each covers a different scope.

  • From $61,995

    Pool with an 80-ft perimeter plus 500 sq ft of standard concrete deck, Sacramento and Roseville area. Spa inside the pool footprint $21,995. Not a locked quote.

    Phenomenal Pool & Landscape: pricing · Effective Aug 2026

  • $45,000–$100,000+

    Custom pool construction in Sacramento. Basic gunite pools start around $45,000.

    Pool Time Pool & Spa: construction

  • $30,000–$100,000+

    Inground pools. Spas $5,000–$20,000 and waterfalls $1,000–$10,000 extra.

    Geremia Pools: average pool cost in Sacramento · May 2024

  • $64,185–$82,700

    15 x 30 ft fiberglass pool with excavation, basic plumbing and electrical, salt system and a 5-ft concrete deck. Older data.

    ProMatcher: Sacramento pool costs · Reports 2018–2021

  • Gunite $93,000 · Fiberglass $71,000

    Its Sacramento figure equals its statewide average for a standard pool before decking, so treat it as a California number, not a local one.

    PriceAPool: California averages

Builder prices are each company’s own starting point. Use them to judge whether a quote is in the normal band, then compare what each bid includes.

What Pushes a Sacramento Pool Price Up

Expansive clay soil

The City of Sacramento’s own pool requirements say expansive soils are likely present at any site in the city, so the steel and gunite must be designed for them unless a soils report shows otherwise. That engineering is built into every city pool, and it is one reason gunite bids here are not cheap. Source: City of Sacramento, CDD-0257 Swimming Pool Requirements (rev. 2026).

Hardpan

Large parts of the eastern Sacramento Valley sit on hardpan, a rock-hard layer that UC Cooperative Extension describes as anywhere from a few inches to many feet thick. The state soil, San Joaquin, has its duripan 20 to 40 inches down, which is well within a pool dig. Breaking it takes heavier equipment and more time, so ask each builder how they price it. Source: UC Cooperative Extension Sacramento County, EHN 53.

Levees and setbacks

City rules keep a pool at least 20 feet from the landside toe of a flood control levee, at least 3 feet from any property line or building, and 6 feet from city water and sewer lines. On a small or levee-side lot these limits can decide the pool’s size and shape. Source: City of Sacramento, CDD-0257.

Pool Permits in Sacramento

In the City of Sacramento, pool permits come from the Community Development Department’s Building Division and are filed online through Accela. Unincorporated areas go through Sacramento County Building Permits and Inspection, and cities such as Elk Grove and Roseville run their own.

What the city asks for

A permit application, an electrical load calculation, a scaled site plan showing distances to the house, property lines and any levee, and either a structural steel schedule (gunite) or the manufacturer’s specifications (fiberglass). Source: City of Sacramento, CDD-0282 Pool Plan Review Guidelines (rev. 2026).

What the permit costs

City fees are based on the contract value or the ICC valuation, whichever is higher. The fee table lists $928 for the permit plus $390 for plan review at a $79,999 valuation. Add a 10% technology surcharge and the general plan, strong motion, green building and business tax fees, and the total is roughly $1,400 on a $60,000 job and $1,700 on an $80,000 job. Those totals are our arithmetic from the city table, not a city quote. Source: City of Sacramento, CDD-0245 Fees on Residential Permits (rev. 2026).

Safety inspection

The city requires an enclosure at least 60 inches high with gaps under 4 inches and gate latches at 60 inches or higher, and the building official inspects the safety features before final approval.

Every new pool at a California home also needs at least two of the seven drowning-prevention features listed in Health and Safety Code 115922, such as a separating fence, a safety cover or alarms on doors to the pool. Price them into the first quote.

What It Costs to Run a Pool in Sacramento

SMUD’s 2026 time-of-day rate is 15.5 cents per kWh off-peak in summer (midnight to noon and weekends) and 37.7 cents at the 5 to 8 pm weekday peak. An assumed 0.8 kW pump running 6 hours a day for 30 days costs about $22 a month off-peak, or about $54 if it ran at peak. Set the pump timer for the morning. Source: SMUD Time-of-Day rate details.

SMUD’s rebate for variable-speed pool pumps has ended, so don’t count on it when comparing equipment. Source: Pool & Spa News (updated Dec 2024).

Summers are hot and nights are cool: NOAA’s 1991–2020 normals put the average July high at 92.6°F and summer lows at 56 to 59°F. A heater or solar cover is what stretches the season into spring and fall. Source: NOAA NCEI climate normals, Sacramento Executive Airport.

Sacramento County Water Agency allows draining and refilling a pool for maintenance, and pool water may go to the storm drain only if it is algae-free and dechlorinated. The agency’s draft shortage plan lists banning pool filling as a possible measure in a declared drought stage. Source: Sacramento County 311: filling and emptying pools.

A new pool is reassessed for property tax when it is finished. Only the pool is added at market value; the land and house keep their existing assessed value. A supplemental tax bill follows. Source: Sacramento County Assessor, Prop 13.

How to Compare Pool Quotes in Sacramento

Send every builder the same written brief: address, pool size and depth, shell type, interior finish, spa, heating, deck area and how equipment gets into the yard. Then ask each one to list what is excluded.

  • Confirm the builder holds a C-53 swimming pool license with the CSLB. Under state law the down payment on a home improvement contract cannot exceed 10% of the price or $1,000, whichever is less.
  • Ask whether permits, plan check, engineering and the soils report are inside the price or billed separately.
  • Get the deck area in square feet and the material, not just "decking included".
  • Ask what happens if the crew hits rock or hard soil: a fixed price, a per-hour rate or a change order.
  • List the two drowning-prevention features the builder plans to install and who pays for them.
  • Ask whether the excavation price assumes hardpan, and what breaking it costs if the crew finds it.

Our California pool cost guide has a worked example of comparing two bids line by line and a free quote comparison worksheet.

Sacramento Pool Cost FAQ

How much does it cost to build a pool in Sacramento?

Most published Sacramento-area prices for a custom inground pool run from about $45,000 to $100,000 or more. Phenomenal Pool & Landscape starts at $61,995 for a pool with an 80-foot perimeter and 500 square feet of concrete deck, and Pool Time Pool & Spa says basic gunite pools start around $45,000.

What is hardpan and does it raise pool cost?

Hardpan is a rock-hard soil layer common in the eastern Sacramento Valley, often 20 to 40 inches below the surface. A pool dig usually goes through it, which takes heavier equipment and more time. Ask each builder whether their excavation price assumes hardpan.

How much is a pool permit in Sacramento?

City of Sacramento fees are based on the contract value. At a $79,999 valuation the table lists $928 for the permit and $390 for plan review; with the surcharges the total comes to roughly $1,700 by our arithmetic. Unincorporated areas and other cities have their own fee schedules.

How much does it cost to run a pool pump in Sacramento?

On SMUD’s 2026 time-of-day rate, a pump using 0.8 kW for 6 hours a day costs about $22 a month if it runs off-peak in the morning, and about $54 a month at the evening peak rate.

How long is pool season in Sacramento?

Sacramento averages 92.6°F in July with cool summer nights in the 50s. An unheated pool is most comfortable in summer; a heater or solar cover extends it into spring and fall.

Pool Cost in Other California Cities

Get a number for your own yard

Pick a size, shell and features in the pool calculator, then compare quotes from Sacramento-area builders.