Pool Cost by Size and Finish
These are the same numbers the calculator above produces, for the pool alone (shell, finish and standard equipment) before a spa, heating or a waterfall. Width times length gives the water area the estimate is priced on.
Inground pool cost by size and finish in California| Pool size | Basic finish | Standard finish | Luxury finish |
|---|
| 10 × 15 ft (plunge)150 sq ft | $27,000 – $36,000 | $35,100 – $46,800 | $48,600 – $64,800 |
|---|
| 12 × 24 ft288 sq ft | $45,216 – $60,288 | $58,781 – $78,374 | $81,389 – $108,518 |
|---|
| 16 × 25 ft400 sq ft | $60,000 – $80,000 | $78,000 – $104,000 | $108,000 – $144,000 |
|---|
| 16 × 32 ft512 sq ft | $76,800 – $102,400 | $99,840 – $133,120 | $138,240 – $184,320 |
|---|
| 20 × 30 ft600 sq ft | $90,000 – $120,000 | $117,000 – $156,000 | $162,000 – $216,000 |
|---|
| 20 × 40 ft800 sq ft | $120,000 – $160,000 | $156,000 – $208,000 | $216,000 – $288,000 |
|---|
How the estimate is built
The base rate is $150 to $200 per square foot of water surface. That sits inside the $100 to $250 per square foot that HomeGuide reports for installed gunite pools, the range our California pool cost guide uses. A standard finish multiplies the base by 1.3 and a luxury finish by 1.8, so luxury results on large pools land above that published range. Below 400 square feet the estimate adds a fixed base for permits, equipment and setup, which do not shrink with the pool, so a 10x15 plunge pool starts at $27,000, the low end This Old House publishes for that size. Extras are added as flat amounts: a spa $15K to $25K, heating $5K to $12K, a waterfall $3K to $8K.
City prices differ. See what builders quote in Los Angeles, San Diego and Sacramento.